Occo WAE85
Occo Coolers (Telford) Ltd Occo Coolers (Telford) Ltd

Occo Air Blast Coolers

T Range

Occo coolers have been manufactured in Telford, Shropshire, for over 30 years.

Specialising in air blast coolers (also known as air blown coolers), the Occo range has provided cooling solutions for companies across the world in a variety of fields, including general hydraulics, offshore, scientific and automotive applications.

In fact anywhere there is a need for cooling - whether it be oil cooling, water cooling or air cooling - Occo has a solution.

We have standard ranges of oil and water air blast coolers, but with 30 years experience behind us we can offer bespoke cooling solutions when required. Standard ranges can also be adapted to conform with non-standard requirements, such as marine environments or ATEX Zones 1 and 2

Offline Coolers


When a cooler can't go in the return line due to excessive pressure pulses, the solution is to take it 'offline' ie taking the oil directly from the tank and returning it back to the tank once it has been cooled.

The OCCO offline range comes with a fully integrated motor pump unit to save space and installation time.

For more details of our range of Pumped coolers visit the Off-line product page

The benefits of air blast cooling

Hydraulic cooler

As no hydraulic system can convert mechanical to hydraulic energy with 100% efficiency, heat is always going to be produced in the system as a byproduct.

This means there will be a rise in the oil temperature that must be controlled in order to optimise the performance of your system.

As the temperature of the oil rises, its viscosity drops and the oil will lose its lubricating properties. This can affect seals and 'O' rings and can ultimately damage the whole system. At best the oil will have to be changed frequently at considerable cost.

Installing an air blast (air blown) cooler ensures the temperature of the oil never exceeds its optimum working temperature.

Air blast coolers can be installed almost anywhere, particularly in locations where water is not available or is too expensive to consider in today's climate.

For more about the company behind the Occo range go to About Us.

Selected Products


Mini SAH (Hydraulic range)

These coolers use simple, two part motors in aluminium or cast iron. The outlet flow must return to tank without restriction although special motors allowing pressured outlets can be fitted. Motor feed pressure/flow is often drawn from a main power line, so standard motor capacity is selected so as to minimise the loss of power.

Small Flat bed cooler

Flat-bed water coolers

Occo's range of flat-bed coolers are for closed circuits and dry air cooling of large heat loads, needed to replace evaporative cooling towers. Due to large dimensions, which are variable to fit into available space, they usually have a horizontal radiator with fans on top blowing upwards. Similar versions may also have a vertical radiator where the site has limited floor area.


The right formula for Formula 1

More and more of the Formula 1 Teams are turning to Occo Coolers for their cooling solutions.

18 June 2015

Occo Coolers Telford achieves ISO quality standard

Occo Coolers Telford is pleased to announce that it has been awarded the ISO 9001:2008 quality standard.

10 October 2010

Occo Coolers (Telford) Ltd
Unit 19 St Georges Road Industrial Estate, Donnington, Telford, Shropshire, TF2 7QZ
sales@occocoolers.co.uk | Tel +44 (0)1952 616381 | Fax +44 (0)5600 753354